ORTUR Laser Master 2 Pro S2 LU2-4 LF SF Laser Engraving Cutting Machine 400 x 430mm Large Engraving Area Fast Speed 10,000mm/Min High Precision Laser Engraver

€338 €703
Banggood
ORTUR Laser Master 2 Pro S2 LU2-4 LF SF Laser Engraving Cutting Machine 400 x 430mm Large Engraving Area Fast Speed 10,000mm/Min High Precision Laser Engraver
ORTUR Laser Master 2 Pro S2 LU2-4 LF SF Laser Engraving Cutting Machine 400 x 430mm Large Engraving Area Fast Speed 10,000mm/Min High Precision Laser Engraver
€338 €703

SaveSavedRemoved 0

ONLY €338 for ORTUR Laser Master 2 Pro S2 LU2-4 LF SF Laser Engraving Cutting Machine 400 x 430mm Large Engraving Area Fast Speed 10,000mm/Min High Precision Laser Engraver – LU2-4-SF

 

*PLEASE NOTE that to avoid customs duties, select Banggood Express or EU Priority Line

 

For more ORTUR offers – HERE
For Banggood Coupons see – HERE

 

 

ORTUR Laser Master 2 Pro S2 LU2-4 LF SF Laser Engraving Cutting Machine 400 x 430mm Large Engraving Area Fast Speed 10,000mm/Min High Precision Laser Engraver

Join Our Telegram Channel

 

More Details:

 

Specification:

LU2-4 SF

Ortur Laser Master=Ortur Laser Master 2ProS2-SF laser engraver has flame detection, emergency stop, etc., It is equipped with the latest OLM-MAXUP-V100% and stronger system reliability, smooth engraving, faster engraving speed, higher accuracy, and more refined engraving products. LU2-4-SF Laser Module focal spot is 0.12×0.15mm. It’s high power and has a compressed laser Spot, so it’s good at cutting and better at engraving harder materials.

LU2-4 LF

Ortur Laser Master=Ortur Laser Master 2ProS2-LF laser engraver has flame detection, emergency stop, etc., It is equipped with the latest OLM-MAXUP-V10 Motherboard and stronger system reliability, smooth engraving, faster engraving speed, higher accuracy. LU2-4-LF Laser Modould is second generation compressed focal spot Long Focus laser head with Air Assist, better for cutting, especially thicker materials. Focal Spot is 0.17×0.25mm, and it can cleanly cut 6mm pine board in a rund pass.

Description

– Advanced Firmware=Ortur Laser 1.8 firmware, smarter, faster, higher precision and easier to use. Specialized Motherboard with 32Bits MCU. It could preprocess 32 instructions, support baud rate as high as 921600, more powerful! Qualified for ESP32 MCUs, optimizes the motion algorithm, and increases the maximum stepper motors speed from 4000mm/min to 10000mm/min.

– Wide Compatibility=Ortur laser master 2ProS2 laser engraver can be compatible with various mature engraving software, such as LaserGRBL, LightBurn, support Win XP / Win 7 / Win 8 / Win 10, and also support MAcs and Linux system (LightBurn, need paid), engraving file format supports JPG, PNG, BMP, JPEG, SVG, ETC, etc.

5 Safety Protection=1. When the engraving machine is displaced or tilted, it will automatically stop the laser to prevent damage to the target from the laser. 2. When the engraving machine or computer crashes, the laser will stop working immediately to prevent continuous fire. 3. The engraving machine is turned on, but there is no movement for a long time, it will be protected, and the laser will be turned off automatically. 4. Flame Detector + Buzzer 5. Emergency Stop Button.

Specification

Brand: Ortur 

Model Number: Laser Master 2  pro S2

Laser Type: LU2-4 SF(Better for engraving), LU2-4 LF(Better for cutting / With air assist nozzle)

Material: Aluminum + Powder Coated Steel

Laser Power: LU2-4 Compressed Focal Spot Laser Module 20w(Electrical Power:20W, Luminous Power: 5000-5500mw) 

Laser Reaching Range: 445 ± 5nm 

Power By: Power Adapter 24V 2A

Package Weight: 4.6 000 kg

Product size (L x W x H): 600x570x189mm

Package size (L x W x H): 660x250x110mm

Features

1.  ●Specialized Motherboard with 32Bits MCU
– It could preprocess 32 instructions, support baud rate as high as 921600, more powerful!
2. The Most Advanced 32Bits Laser Engraver Firmware
– Ortur laser master firmware, smarter, faster, higher precision and easier to use.
3. Laser power range could be S0 – S1000, compared to 8bits desktop laser engravers, which only has S0 – S255, Ortur Laser Master could control laser beam more accurately, could even use the high power laser unit to “draw” a picture on paper , that the 8bits high power laser engravers could not do.
4. Engraving speed could be as high as 3000MM/Min. ( If do not consider the laser carving result, the velocitys of movement could be as high as 1000MM/S )
5. Active Position Protection
– There is a G-sensor on the motherboard, if the machine detects unauthorized movement, the laser beam will stop.
6. Laser Beam Safety Guard
– If your computer system halted or USB cable disconnected, led to that the laser engraver stops moving, the laser beam will stop, to prevent fire.
7. Exposure Duration Detection and Limitation
– If laser engraver is under control, but users forget to operate and keep the laser beam working, extra safety will cut off in case the motor stopped moving, to prevent fire.
8. LaserGRBL ( free software ) supports Windows XP, 7, 8, 10. LaserGRBL is the most popular carving software in the world, could import different format images, you could editing in PhotoShop, Inkscape, CAD, etc. and then connect to the engraver via laser LaserGRBL for engraving and cutting.
9. LightBurn ( paid software, lightburnsoftware.com ) supports Windows, Macs OS, and Linux. It’s the most popular paid carving software in the world, very easy to use.
10. This laser engraver supports PWM mode.
11. Pre-assembled parts, just need 10 – 20 minutes to install the machine.
12. 400 x 430 mm large engraving area.
13. Aluminum profile frame + structured cabling, solid structure, smooth operation, attractive appearance.
14. Synchronizing shaft mechanical structure, avoid out-sync on two Y rails, during full speed engraving.

Q&A

Q: How long does it take to assemble?

A: 10-15 minutes (Depends on your preparation).

Q: Which engraving software is supported?

A: LaserGrbl (Free)(Windows XP, Windows 7, Windows 8, Windows 10): Download Page

LightBurn (Paid-30 Day Free Trial)(Macs OS, Linux, Windows XP, Windows 7, Windows 8, Windows 10): Download Page 

Q: Can I engrave metal and stainless steel?

A: You can mark the metal after plating or spraying (acting on the coating or oxide layer), stainless steel (the effect is better after the stainless steel is painted black. Note: It is not engraving, but discoloration).

Q: What is the maximum cutting thickness of the board?

A: With LU2-4 laser module, it can cut 4mm plywood (wood plywood) or 6mm pine board with one cut.

Q: How many hours can Laser Master 2 Pro work continuously?

A: 24 hours (In a well-ventilated environment).

Q: Can the laser module be replaced?

A: Yes, but the Laser Module input voltage needs to support 24V.

Q: How long is the warranty period?

A: One year warranty (We will send you the corresponding non-artificially damaged parts for free).

Q: Is it possible to engrave cylindrical surfaces?

A: Need to purchase Ortur YRR series Rotary Roller as an accessory to sculpt the cylindrical surface.

Q: How to set the correct focal length?

A: All Ortur laser modules have a fixed focal length (the distance from the laser module to the surface of the object is fixed).

Note

● Please wear goggles when operating the laser engraver. Wear safety goggles to avoid blindness.
● Please do not touch the laser emitter with your hand, or it may burn your hand.
● Please avoid strong impact on the machine.
● Children under 14 are not allowed to use this product and children over 14 need adult supervision.
● The light engraving machine can not be directly applied to any mirror reflecting object, which may cause injury to the operator or burn the laser.
● This product is not recommended for industrial cutting due to its high engraving speed.

Manual

Click Here

Package Included

1 x Laser Engraving Machine

Accessories

 

ID:1906594 – SKUI68977

1906594CN

Kupon4U.com
Logo
Enable registration in settings - general